PRODUCT - PUTTY
Safest Wall Care Putty
Availlable in pack sizes
Color | Weight |
---|---|
White | 20 kgs and 40 kgs.in inner P.E paper bags. |
Coverage
Area coverage is about 15-20 sq.ft/kg/2 coats in 1.5 mm thicness.
USP : SAFEST WALL CARE PUTTY is white cement based plaster putty mix providing the filling benefits of plaster as well as smoothness of the wall.
Usage Area : Interior as well as Extrior walls,Surfaces exposed to the elements where a high performance water proofing and decorative coating is desirable.
Directions for Use:
- Clean: Plastard surfaces should be matured and properly dried and must be free from grease and oil and loose flacking materials must be removed by scraping or other abrasive methodes. Then sand surface with emery paper no.180 and wipe it to remove the dust.
- Prime: Apply one coat of SAFEST INTERIOR/EXTERIOR PRIMER by suitable thinning with potable water and allow it for 6-8 hours.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of SAFEST WALL CARE PUTTY diluting 1 kg with 400-500 ml of water and allow it drying for 4-6 hours.Apply 2-3 coats and sand the dried surfaces with emery paper no.180 wipe it clean.Apply another coat of SAFEST INTERIOR/EXTERIOR PRIMER over the sanded putty and allow it to dry for 6-8 hours.
Technical data
- Diluent: Potable Water
- Recommended Surfaces: Sand/Cement plasters,Asbestos,Brick work,concrete block and fibreboard.
- Method of Application: Putty Knife or Trowel.
- Dilution ratio: 400-450 ml of potable water per 1 kg putty.
- Drying Time:Surface Dry -30 minutes,Hard Dry-4 hours.Recoating time – 8 hours.
- Gloss level: Matt Finish.
- Fire Hazard Class: Non Flammable.
- Flash Point: N.A(hence 100% waterbased).
- Pot Life: 45-60 mints.
- VOC: Nil.
- Density: 2.85.
- Dilution Ratio: No dilution.
- No. of coats: 2-3.
- Safety Data: Refer MSDS.
Safest Acrylic Wall Putty
Availlable in pack sizes
Color | Weight |
---|---|
White | 1 kg,5 kgs,10 kgs and 20 kgs |
Coverage
Area coverage is about 30-35 sq.ft/kg/2 coats in 1.5 mm thicness.
USP : Premium Acrylic Wall Putty is water based putty thatenhances the durability as well as look of the paints.
Usage Area : Interior walls,Surfaces exposed to the elements where a high performance water proofing and decorative coating is desirable.
Directions for Use:
- Clean: Plastard surfaces should be matured and properly dried and must be free from grease and oil and loose flacking materials must be removed by scraping or other abrasive methodes. Then sand surface with emery paper no.180 and wipe it to remove the dust.
- Prime: Apply one coat of SAFEST INTERIOR PRIMER by suitable thinning with potable water and allow it for 4-6 hours.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of SAFEST ACRYLIC WALL PUTTY and allow it drying for 4-6 hours.Sand the dried surfaces with emery paper no.180 wipe it clean.Apply another coat of SAFEST INTERIOR PRIMER over the sanded putty and allow it to dry for 6-8 hours.
Technical data
- Diluent: Potable Water
- Recommended Surfaces: Sand/Cement plasters,Asbestos,Brick work,concrete block and fibreboard.
- Method of Application: Putty Knife or Trowel.
- Drying Time: Surface Dry -30 minutes,Hard Dry-4 hours.Recoating time – 8 hours.
- Gloss level: Matt Finish.
- Fire Hazard Class: Non Flammable.
- Flash Point: N.A(hence 100% waterbased).
- Pot Life: 24 hours post dilution.Lid to be kept airtight when not in use.
- VOC: 8.5 gm/ltr.
- Density: 1.71 +/-0.02.
- Dilution Ratio: No dilution.
- No. of coats: 2-3.
- Safety Data: Refer MSDS.