All Kind of Enamel

Safest Premium Synthetic Glossy Enamel

Availlable in pack sizes
Color | Weight |
---|---|
White | 200 ml,500 ml,1 ltr,4 ltr and 20 ltr. |
Shades | 200 ml,500 ml,1 ltr,4 ltr and 20 ltr. |
Coverage : Area coverage is about 180-200 sq. ft/ ltr/coat.
USP : Safest Premium Synthetic Glossy Enamel imparts a shiny new look. Provides a long lasting washable finish.
Usage Area : Wood , Metal and Wall surfaces.
Directions for Use:
- Clean: Prepare the surface by sanding with Emery Paper 180 to remove loose particals, paint, dust/grease and cracked or flaked paint. wipe clean.
- Primer : Apply a 1st coat of primer depending on the surface. For wooden surfaces use SAFEST WOOD PRIMER .For steel surfaces use SAFEST METAL PRIMER by diluting with Enamel Thinner 10-15% by volume for Brushing, 15-20% by volume for Spraying. Apply one coat of Primer by Brushing or Spraying. Allow to dry for 6-8 hours.
- Putty : (Optional) Smoothen the surface by filling dents with the SAFEST KNIFING PASTE FILLER with putty knife. Allow to dry for 6-8 hrs. Then sand with emery 180 and wipe clean.
- Primer: If SAFEST KNIFING PASTE FILLER has been used ,apply another coat of primer(For wooden surfaces use SAFEST WOOD PRIMER ,For steel surfaces use SAFEST METAL PRIMER). Allow it to dry for 6-8 hours. Sand with Emery Paper 320 wipe clean.
- TOP COAT:Thin a litre of Safest Premium Synthetic Glossy Enamel with 80-100 ml of enamel thinner . Apply first coat ,after an interval of 8 hours apply the second coat.
Technical data
- Diluent: Enamel Thinner.
- Recommended Surfaces: Wood/metal/wall.
- Method of Application: By Brush or Spray.
- Dillution ratio: 80ml-100 ml of enamel thinner.
- Drying Time: Tack free 3 hrs, Surface Dry -60 minutes, Hard Dry-over night.
- Gloss level: 70-80 T 60 deg gloss head,coated in metal tin panel.
- Fire Hazard Class: B.
- Flash Point: More than 40 Degree C.
- Pot Life: Thinned paint to be used before 24 hours. Lid to be kept airtight when not in use.
- Density: 0.90 - 1.10.
- No. of coats: 2-3.
- Safety Data: Refer MSDS.